revisions rev. description date approved j revised per eco 8270 3/28/06 j.s. k revised and redrawn per eco 11487 6/6/16 k.r. 20 vdc 24 vdc 401-2808 401-2308 kkk none 3 1 switch, spdt, failsafe 401-2x08 12 vdc 401-2208 sara lee 05/24/16 g. nicklaus 6/2/2016 s. lynch 6/2/2016 j. lee 6/6/2016 sma-female connectors 401-2908 15 vdc 401-2708 28 vdc coil voltage part number 04-0004 rev. c 5/27/10 401-2308 ventura, ca. 93003-5641 date manufacturing quality engineering drawn approvals sheet no. revisions 123 ph: (805) 650-0260 f i n a l a s s y : scale 00471 code ident. no. fax: (805) 650-1734 dwg. no. 4822 mcgrath street of sheet nominal technologies company
00471 dow-key microwave corporation nc com no 11.2 .440 2.3 11.4 2x .450 2.4 .170 .093 30.2 .075 1.9 4.3 1.190 .090 .120 3.0 marking identification 2 1 k 401-2x08 3 2 none 401-2308 final assy: rev. dwg. no. sheet of 3 scale angles: .010 .030 unless otherwise specified tolerances are: .xxx .xx code ident. no. 04-0004 rev. c 5/27/10 00471 outline drawing: [ ] millimeters 3x sma-female connector [33.9] 1.34 3x .30 6.3 2x .25 .235 7.6 6.0 .50 12.7 6.6 11.2 .440 1.34 34.0 .670 17.0 .52 13.2 .26 .880 22.4
- 2 + 1 no com nc dc - 1 1 - 4 4 - 8 8 - 12 12 - 18 1.10:1 1.15:1 1.20:1 1.30:1 1.35:1 0.10 0.15 0.20 0.30 0.35 85 80 70 65 60 200 125 90 75 60 50 ohms 15ms max failsafe spdt break before make 1.2oz (34g) nominal 1,000,000 cycles minimum -25 c to +65 c -55 c to +85 c epoxy seal 1.0 rf characteristics: 1.1 frequency (ghz) 1.2 vswr (ratio max) 1.3 insertion loss (db max) 1.4 isolation (db min) 1.5 rf power (watts cw max) at sea level, +25 c, load vswr 1:1 1.6 impedance (nominal) 2.3 operating mode 2.2 switching time 2.0 actuation data: 2.1 3.1 contact arrangement 3.2 rf contacts 3.4 design life 3.3 weight 3.0 mechanical: 4.2 storage temperature 4.0 environmental: 4.1 operating temperature nominal voltage operating voltage current (nominal) @ nominal voltage & 25 c 12 11-14 185ma 15 13-17 160ma 20 17-23 140ma 24 20-28 120ma 28 24-32 90ma switch shown in the de-energized position 4.3 seal: k none 3 3 401-2x08 final assy: schematic: 04-0004 rev. c 5/27/10 rev. sheet of dwg. no. scale 00471 code ident. no. 401-2308 specification:
|
